FAQ 1: Why am I not seeing the PLC listed?

Verify that the PLC is connected to the network by checking the cable connection.  Also, confirm that the computer and the PLC are in the same network address range (for example: 192.168.0.2 and 192.168.0.5).

FAQ 2: How do I see real-time data?

Select the Display Real-Time Data option in Step 3. Optionally, you can enter the desired refresh interval in the Refresh Interval section of configuration.

FAQ 3: How do I register my copy of Remote Set Point?

Start Remote Set Point and go to Help -> Registration in the menu. You will then see a window with a Key field.  Copy the key in this field and go to:

www.bizwaredirect.com/remotesetpointregistration.aspx

Enter the serial number assigned to you. This can be found on the back of the software case. Next, paste the key that was copied from the Remote Set Point Registration window into the Key field on the Web form.  Click Register. If successful, a new and unique key code will be created for you. Copy this new key, and paste it into the original Remote Set Point Registration screen. Click OK.

Back to Remote Set Point Main Product Page

Ask a Question